WINDERMATE - 7oz winders

WINDERMATE™ DRILL ADAPTER

FOR STANWOOD YBW-M

(7 oz) WINDER

Upgrade your yarn‑winding setup and reduce arm and wrist strain with the WINDERMATE. This 3D‑printed yarn winder drill attachment slips over the crank handle of your winder, allowing your drill to spin the winder quickly, smoothly, and hands‑free.

• 3D‑printed plastic body with a long, durable metal shaft
• Compatible with 7 oz Stanwood Compact Yarn Ball Winder (model YBW-M)
• Saves time and reduces arm, wrist, and hand fatigue during yarn winding
• Installs in seconds and works with any standard drill

How to Use

1. Insert the WINDERMATE into your drill’s chuck and tighten. If your drill has a torque adjustment ring, set it to a low number.

2. Slide the adapter over the winder’s crank handle, ensuring the WINDERMATE adapter is fully seated on the handle.

3. Set your drill to low speed (typically “1”) and begin winding slowly.

4. Increase speed only if your yarn is feeding smoothly and without tension issues.

Safety Cautions

• Use only on the drill’s low‑speed setting. High speeds may cause yarn jams or you could injure yourself or damage the winder due to unforeseen sudden forces.
• Plastic component—avoid excessive speed, torque, and exposure to heat or prolonged direct sunlight.
• Ensure your yarn winder is firmly clamped and stable before using the WINDERMATE drill adapter.

Materials: Plastic, Metal 

This product has been modified to fit this winder. It is based on this 3D project: Hand crank motorizer by DavidPhillipOster on Thingiverse: https://www.thingiverse.com/thing:1963818.